Search
Search

Philips Omega: Revelation - 8" Splay Lens Reflector Downlight - 1 or 2 Lamp Horizontal CFL: 18, 26, 32 or 42 watt

Category: Downlights
Revelation - 8" Splay Lens Reflector Downlight - 1 or 2 Lamp Horizontal CFL: 18, 26, 32 or 42 watt by Philips Omega
Model Number - Revelation - 8" Splay Lens Reflector Downlight - 1 or 2 Lamp Horizontal CFL: 18, 26, 32 or 42 watt
Types/Specifications
  • 1
Application Internal
Ballast Type Type 1 Class P
Fixture Material Steel
Industry Standards UL Listed - For use in wet locations, NFPA Life Safety Code, OSHA, NEC
Lamp - Watts per 18 W, 26 W, 32 W, 42 W
Lamp Envelope PLT, QPL
Lamp Type Compact Fluorescent
Lamps - Number of 1, 2
Lamps - Total Wattage 18 W-84 W
Manufacturer Product Line Revelation
Mounting Type Recessed
Overall Height 7"
Overall Length 24-13/16"
Overall Width 14-1/2"
Specification Sheet RV1-31
Sustainability Website URL Day-Brite Corporate Responsibility
Voltage 120/277 V, 347 V
Description
View at source
PRODUCT INFORMATION
Applications
A soft edged, lensed downlight for use with energy efficient compact fluorescent lamps. Provides broad, uniform light distribution while concealing lamp image and maintaining good visual cutoff. Ideal for areas such as lobbies, corridors, canopies, soffits, restaurants and offices.
Specifications
  1. Ballast - One (1) Type 1 Class P, high power factor universal voltage electronic compact fluorescent ballast. Offer both 1 or 2 lamp operation for 120 through 277 volt input voltage.
  2. Mounting pan - Precision die-stamped 16 gauge galvanized steel. Accommodates ceiling materials up to 1-3/8" thick.
  3. Installation - Mounting pan has pre-installed C-channel with vertical and horizontal adjustments. Ballasts and junction box are accessible from below ceiling. For 27” flat bar hanger pair, specify Q1031 accessory, ordered separately.
  4. Splay trim - Spun aluminum regressed splay trim with white powder paint finish. Torsion spring mounting for ease of installation. Flat fresnel and prismatic lens for smooth, even distribution of light. Flat clear tempered lens for enclosed application.
  5. Baffle - Precision machined .051 aluminum with deep grooves to minimize aperture glare, anodized matte black or matte white finish. Standard flat flange is painted white. Optional black flange available, add FF to catalog number.
  6. Sockets - CFM42W/GX24q, CFM32W/GX24q, CFM26W/GX24q, CFM18W/GX24q, CFQ26W/G24q, CFQ18W/G24q.
  7. Junction box - Extra large 43.75-cubic inch 16 gauge galvanized steel with snap-on cover and ground wire riveted to frame. Approved for through wiring with up to 8 #12 AWG conductors.
  8. Optional emergency system - Emergency system includes battery, electronic circuitry, charger, and test/monitor plate with test switch and charging indicator light. Test monitor plate may be installed in the ceiling near the fixture or other remote location. Operates appropriate lamp wattage for a minimum of 90 minutes following power failure. Battery is recharged automatically following restoration of power. Emergency system complies with NFPA life safety code, OSHA and NEC. Suitable for dry locations.
  9. U.L. Listed - For use in wet locations in covered ceiling applications only. Approved for Through Branch Circuit Wiring. I.B.E.W. union made. Canadian Specifications may vary from these shown, consult Canadian Division.

For additional information contact Philips Omega - daybrite.applications@philips.com
Email
  
Download Selected to Local
About Autodesk 360
Close
Autodesk® 360 helps you increase mobility, improve collaboration and optimize your designs-advancing the way you work. Store your design files online so you can access, share and view them anytime, anywhere.
Learn More About Autodesk 360
Show All Files 17 files for download
  • 1 RFA file
  • 1 DWG file
  • 1 DXF file
  • 1 DGN file
  • 7 PDF files
  • 1 ZIP file
  • 4 IES files
  • 1 XLSX file
Autodesk Seek Viewer
 

Send File Feedback

  • File Information

  • Feedback

    Comments about this file
  • Sending Feedback

File Comments Received

Thank you for your feedback
  • Manufacturer is involved in the publishing of the product information and design files. Seek works with the manufacturer to confirm information is up to date.
  • This family is hosted by a FACE.
  • MEP connectors are present for this family.
  • This family includes MATERIALS.
  • This family includes SHARED PARAMETERS from the Revit Master Parameter list.
  • This family includes COMPLETE MANUFACTURER METADATA.
  • This family contains geometry that is CONSTRAINED TO REFERENCES.
  • This family contains views that are 2D READY.
Terms and Conditions
You must accept the terms and conditions to continue.
I have read and agree to the Terms and Conditions.

Accept
Cancel
Tired of seeing this screen? Join now!

Join Seek Now and experience a new level of service. With a single sign on you will only need to agree to our Terms and Conditions once.

Join Now
Autodesk Seek Viewer License Agreement

Install Autodesk Seek Viewer now! Our high-performance and lightweight viewer allows you to preview and interact with 3D design files before download.

Operating System: Windows
Browser: Internet Explorer, Firefox
Size: 2.6 MB

Download time estimate: 15 seconds with DSL (1.5M), System administrator rights required

By clicking on the Accept and Install button below, I agree to the Autodesk Seek Viewer License Agreement and the Autodesk Seek web service Terms and Conditions.

Accept
Cancel
  • The Autodesk® Seek web service enables designers to discover, preview, and download BIM models, drawings, and specifications. For manufacturers, it's a unique way to connect with designers and consumers who specify or recommend building products.
Autodesk
© Autodesk, Inc. All rights reserved. Privacy Terms and Conditions