DURA-CAP®
Floor Underlayment
03 54 00/MAX BuyLine 5015

Maxxon® Corporation
920 Hamel Road, PO Box 253
Hamel, MN 55340
Phone: 1-(800) 356-7887 or (763) 478-9600
Fax: (763) 478-2431
E-mail: info@maxxon.com
Web site: www.maxxon.com



To smooth concrete slabs or precast planks, use Dura-Cap®. It’s formulated to cap rough, pitted, cracked and out-of-level concrete. In renovation projects, it can be poured directly over old tile and adhesive residue. Gyp-Crete 2000®/3.2K and Dura-Cap can also be used over a special encapsulant to abate vinyl asbestos tile. Consult your Maxxon dealer for more details on this safe and extremely cost-effective method of abatement.

NEW! "GREEN" FORMULATIONS NOW AVAILABLE.



DURA-CAP® TECHNICAL DATA

Compressive Strength:
Typical range of 2,500 to 3,800 psi (17 to 26 MPa)

VOC Content:
<0.24 mg/m 3

‘K’ factor:
4.76 Btu/(h · ft² · ºF) (.6854 W/[m · ºC])

Specific Heat:
.229 Btu/(lb · ºF) at 85ºF (.9595 kJ[kg · ºC] at 29.44ºC)

Weight:
At 1/2", less than 4.8 lbs./sq.ft. (At 12.7 mm, less than 23.5 kg/m²)

Dry Density:
115 lbs./ft.³ (1840 kg/m³)

Surface Burning Characteristics:
Flame spread: 0
Fuel contributed: 0
Smoke density: 0
Certification: GREENGUARD Children and Schools SM
DURA-CAP® FLOOR UNDERLAYMENT CSI FORMATTED SPECIFICATIONS FOR THE FOLLOWING APPLICATIONS APPEAR IN THIS PROFILE. Customized CSI formatted specifications are available upon request, or on our website at www.maxxon.com.