Aluminum Storefront Swing Doors

100 Series 2 1/4" Narrow Stile
135 Series 3 11/16" Medium Stile
150 Series 5" Wide Stile
135-H Series 3 11/16" Medium Stile Heavy Wall
150-H Series 5" Wide Stile Heavy Wall
135-I Series 3 11/16" Medium Stile Isobar
150-I Series 5" Wide Stile Isobar
Manko's auto-showroom doors are designed for Car Dealerships, Museums, or any other commercial building application where large opening access is required. These doors are offered in narrow stile, medium stile, and wide stile configurations.

When combined with optional rails and intermediates (horizontal and/or vertical), our door systems are flexible enough to meet most design and hardware requirements. The availability of multiple glazing stops allow for the use of a broad range of glazing products.

All storefront doors utilize a telescoping mortise and tenon joint coupled with a horizontal shear block. The joints are then further reinforced with a 3/8" steel tie rod and sleeve. This tripled redundancy ensures structural integrity and long term durability. Welded corner construction is also available upon request.

Anti Terrorist Force Protection (ATFP) certification can be obtained using these systems (consult factory for details).

FEATURES
Structurally tested per ANSI/AAMA 101
3-way corner construction (welded upon request)
Horizontal and vertical midrail options
3/16" to 1" glazing infills
6063-T5 or 6063-T6 aluminum alloy
.125 or .187 wall thickness
1 3/4 " or 2" face dimensions
Adjustable glass setting blocks
Double adjustable astragals with
poly-pile weathering on pairs
Standard 1" round offset push-pulls
Offset pivots, butt hinges, center pivots or continuous geared hinges options
Maximum security dead bolts
Doors will accommodate most hardware types
Full range of anodize finishes
Full range of architectural painted finishes
Spandrel and composite glazing panels
Integral structural thermal barrier on
135-I and 150-I series