Lumivent Automatic Fire Vent
_x000D_ All the security and value of an automatic fire vent with the added benefits of a skylight. The Lumivent® is UL-listed and features a multi-wall polycarbonate cover design that resists UV degradation and offers superior insulation performance over traditional domes._x000D_

_x000D_ Standard Features and Benefits_x000D_

Thermolatch® II positive hold/release mechanism ensures reliable vent operation when a fire occurs. Automatically releases vent covers upon the melting of a UL-listed 165°F (74°C) fusible link. The curb-mounted fusible link housing allows the latch to be quickly and easily reset from the roof level.

_x000D_

Engineered with powerful lifting mechanisms to open the covers in snow and wind conditions

_x000D_

Heavy duty shock absorbers assure smooth opening and eliminate the possibility of operational, roofing or structural damage

_x000D_

Fully insulated and gasketed for weather-tightness

_x000D_

Constructed with corrosion resistant materials to provide many years of trouble free, dependable service

_x000D_

Available in a number of standard UL listed sizes

_x000D_

_x000D_ Guide Specifications_x000D_

Material: Cover and frame are 11 gauge (2.3 mm) aluminum

_x000D_

Covers: Constructed with a translucent multi-wall polycarbonate sheet* framed with rigid extruded aluminum and coated for UV resistance. Glazing shall provide an R-factor of 2.38 per ASTM D236.

_x000D_

Curb: 12"" (305 mm) in height with integral capflashing, 1"" (25 mm) fiberboard insulation, fully welded at corners, and 3-1/2"" (89 mm) mounting flange with 7/16"" holes (11 mm) provided for securing frame to the roof deck.

_x000D_

Gasket: Dual durometer, co-extruded, EPDM rubber gasket mechanically fastened to the top of the curb.

_x000D_

Hinges: Heavy-duty stainless steel pintle hinges with 3/8"" (9 mm) type 316 stainless steel hinge pins.

_x000D_

Latch: Positive hold/release mechanism controlled by a single UL-listed 165°F (74°C) fusible link with a separate latching point for each cover. Designed to hold the covers closed against a 90 psf (438kg/m2) wind uplift force. Provided with interior and exterior pull release cables to manually open vent covers.

_x000D_

Operation: High performance gas springs open covers automatically against a 10 psf (49 kg/m2) snow/wind load when released. Gas springs have integral dampers to assure a controlled rate of cover opening and have a cyclic durability of 50,000 cycles. Automatic hold-open arms lock each cover in the full open position.

_x000D_

Performance Ratings: UL-listed. Complies with UL 790 Class A (burning brand test)

_x000D_

Finish: Mill Finish

_x000D_

Hardware: Gas springs have a powder coated outer tube and chrome plated inner rod. Hinges are type 316 stainless steel hinges. All other hardware is zinc plated/chromate sealed.

_x000D_

_x000D_ * The Bilco Lumivent fire vent was designed and tested to meet the requirements of UL 793. As part of this testing procedure, UL 793 requires that the polycarbonate covers be subjected to a 400 ft lb test and remain intact to meet the OSHA fall protection standard CFR 1910.23. The Bilco Lumivent fire vent meets or exceeds these requirements.